Selecting A City/Town Centre As The Destination - ZENEC GPS NAVIGATION SYSTEM User Manual

6. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
new location. Tap
7. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap

3.1.2.4 Selecting a city/town centre as the destination

The city/town centre is not the geometric centre of the city/town but an arbitrary point the map
creators have chosen. In towns and villages, it is usually the most important intersection; in
larger cities, it is one of the important intersections.
1. If you are on the Map screen, tap
menu.
2. In the Navigation menu, tap the following buttons:
3. If necessary, modify the country as described earlier (page 36).
4. Select the destination city/town:
a. Tap
b. Start entering the name of the city/town on the keyboard.
c. Find the city/town you need:
•
The most likely city/town name is always shown in the input field. To
accept it, tap
to confirm the destination, or tap
to select a different destination.
and start your journey.
.
.
41
) appears at the
to modify route
to return to the Navigation
, .