User Profiles - ZENEC GPS NAVIGATION SYSTEM User Manual

Route Planning Method types:
Button

6.3.5 User profiles

If more drivers use Zenec navigationfor navigating, their settings can be remembered by
using one of the user profiles. Rename the profiles after tapping the edit button on the right so
that all users know which profile to use and switch between profiles by tapping its name. If
you select a new profile, the application restarts so that the new settings can take effect.
Gives a quick route if you can travel at or near the speed limit on all
roads. Usually the best selection for fast and normal cars.
Gives a short route to minimise the distance to travel. It can be
practical for slow vehicles. Searching for a short route regardless of
the speed, this route type is rarely practical for normal vehicles.
Gives a quick but fuel efficient route based on the fuel consumption
data given in Route settings (page 95). Travel cost and CO
calculations are estimations only. They cannot take elevations, curves
and traffic conditions into account.
For vehicle types where Green routing is not available, this method
combines the benefits of Fast and Short: Zenec navigation calculates
as if it were calculating the Fast route, but it takes other roads as well
to save fuel.
Results in a route with fewer turns and no difficult manoeuvres. With
this option, you can make Zenec navigation to take, for example, the
motorway instead of a series of smaller roads or streets.
Description
98
emission
2