Quick Menu - ZENEC GPS NAVIGATION SYSTEM User Manual

Compass in
3D map view
mode
Location
information
Return to
normal
navigation
Additional
options
Select
destination

2.3.5 Quick menu

The Quick menu is a selection of controls and functions that are frequently needed during
navigation. It can be opened directly from the Map screen by tapping
The menu will close after a few seconds of inactivity or if you tap
The menu will also close if you initiate simple controls like muting the device. In other cases
tapping a button will open a new screen with options.
Most of these functions are shortcuts. They are accessible from the menu system.
There are more functions available than the number of buttons in the menu. In Settings, you
can choose the function of each button (page 94). The following options are available:
Button
Master
This slider adjusts the sound volume of the
Volume slider
device. All sounds of the application are affected.
This switch mutes all sounds of the application.
Tap again to re-enable sounds.
,
The direction of the compass shows North. Tap the
button to switch to North-up view, and then tap again
,
to rotate the map in the previous direction.
Tap this button to open a new screen with information
about the selected map point, the Cursor.
Tap this button to move the map back to follow the
current GPS position. Automatic map rotation is also
re-enabled.
The map manipulation
navigation continues.
Tap this button to open a list of additional features
like saving the Cursor as a Favourite destination, or
searching for Places around the Cursor.
Tap this button to select the Cursor as a new
destination. The route is automatically calculated.
Description
21
buttons disappear
.
.
Shortcut for
More / Settings / Sound
and Warnings / Volume
/ Master slider
More / Settings / Sound
and Warnings / Volume
/ Master switch
and