Smart Search - Navigating To An Intersection - ZENEC GPS NAVIGATION SYSTEM User Manual

The alternative way to search for an address is to tap the
Unlike the Combined Search, this alternative search method is a structured one
Note!
where you can define the parts of the address separately. Search for the city or
town and then tap

3.1.1.3 Smart Search - Navigating to an intersection

To find an intersection in Smart Search, carry out the search as described earlier but use the
'&' sign to separate the two intersecting streets. You do not need to use spaces before and
after the separator character. For example you can use any of the following input texts to find
the intersections of Collins Street and Douglas Avenue (the more precise the input string the
fewer false results are expected):
•
Collins St & Douglas Ave
•
Collins & Douglas
•
Coll St & Dou Av
•
Col&Doug
•
C&D
•
Collins St& (this one will give you all the intersections of Collins Street so that you can
select the appropriate one from the result list)
When you get to the result screen, do as follows:
1. Tap at the top of the screen.
2. The list is now filtered. What you see is the list of matching intersections.
3. Scroll down the list if necessary and then select one intersection from the list.
4. Once the destination is selected, a full screen map appears with the selected point in
the middle. If necessary, tap the map somewhere else to modify the destination. The
Cursor ( ) appears at the new location. Tap
destination, or tap
5. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
parameters, or tap
.
to select a different destination.
and start your journey.
31
button inFind menu.
to confirm the
to modify route