Entering An Address - ZENEC GPS NAVIGATION SYSTEM User Manual

3.1.2.1 Entering an address

To enter an address as the destination, do as follows:
1. If you are on the Map screen, tap
menu.
2. In the Navigation menu, tap the following buttons:
3. By default, Zenec navigation proposes the country and city/town where you are. If
needed, tap
keyboard, and select one country from the list of results.
4. If needed, select a new city/town:
a. Tap
b. Start entering the name of the city/town on the keyboard.
c. Find the city/town you need:
•
The most likely city/town name is always shown in the input field. To
accept it, tap
•
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
results before it appears automatically, tap
the city/town from the list.
5. Enter the street name:
a. Tap
b. Start entering the street name on the keyboard.
c. Find the street you need:
, enter the first few letters of the country name on the
.
.
.
36
to return to the Navigation
, .
). Select