Sound And Warnings - ZENEC GPS NAVIGATION SYSTEM User Manual

6.3.1 Sound and Warnings

Change the voice guidance language, enable and set up different warnings and alerts.
Button
Delete all saved data and reset all settings to their factory defaults.
This button shows the current voice guidance profile. By tapping the
button, you can select a new profile from the list of available languages
and speakers. Tap any of these to hear a sample voice prompt. Just
tap
language.
Different voice profiles are capable of different levels of service:
•
Natural Voice: These prerecorded sounds can only tell you
basic information about turns and distances.
•
TTS Voice: These computed voices can tell you complex
instructions, they can tell you the street names or read out the
system messages for you.
Tap this button to adjust the enhanced TTS features. The following
settings are available:
•
You can set the feature to read out traffic messages.
•
Whenever a route is calculated, the software can read out the
quick summary of the route.
•
When you cross country borders, the application can read out
the information about the country you have just entered.
•
All system messages can also be announced.
Street names sound correctly only if you use a native voice profile for
the country. You can decide whether the application
•
tries to read the street names in a foreign country,
•
use road numbers in your language or
•
announces the manoeuvre only.
You can also decide whether you want an announcement for distance
manoeuvres or it is enough to receive the information when the turn is
near.
Tap this button to set the verbosity of the voice instructions: how much
they tell and how often they speak.
Description
when you have selected the new spoken
92