Whirlpool RS160LXT Manual page 17

• Assemble a UL listed conduit connector in
the opening.
A. Removable retaining nut
B. Strain relief
• Feed the flexible conduit through the strain
relief, allowing enough slack to easily attach
wiring to the terminal block.
• Tighten strain relief screw against the flex-
ible conduit.
5. Replace back panel and screws on rear of
range.
A
6. Complete installation following instructions
for your type of electrical connection:
4-wire (recommended)
3-wire (if 4-wire is not available)
B
2-9