Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
DOOR LATCH ASSEMBLY SWITCH
Refer to page 4-12 for the procedure for ser-
vicing the door latch assembly switch.
1. Unplug range or disconnect power.
2. Disconnect the wires from the door latch
assembly switch terminals.
3. Set the ohmmeter to the R x 1 scale.
4. Touch the ohmmeter test leads to the door
latch assembly switch terminals. The meter
should indicate a open circuit (∞).
WARNING
Electrical Shock Hazard
5-5