Sheet Printing Is Selected; Regular Printing Is Selected, But A Roll Is Loaded; Paper Jam; Push The Release Lever Back - Canon imagePROGRAF iPF655 User Manual

Sheet printing is selected.

Cause
You have attempted to print a test print sheet or
other printer status information on a sheet, but
no sheet is loaded.

Regular printing is selected, but a roll is loaded.

Cause
A print job for printing
on sheets was sent
when a roll is loaded.

Paper jam

"Push the release lever back."

Cause
A paper jam oc- 1. Push the Release Lever back and remove the jammed paper.
curred in the
printer during
printing.
2. Load the paper.
3. Pull the Release Lever forward.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen,
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
iPF655
Press ▲ or ▼ to select Load Cut Sheet, and then press the OK
button. Load the sheet, and then print.
(See "Loading and Printing on Sheets.")
To print on rolls, follow these steps.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK
2. Load a roll and try printing again.
(See "Loading and Printing on Rolls.")
1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop print-
ing.
2. After removing the roll, load and print on a sheet of the type and size of paper you have
specified in the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
press the OK button.
Printing will resume, starting from the page on which the error occurred.
Error Message
Corrective Action
button to stop printing.
Corrective Action
→P.643
→P.9
Corrective Action
→P.842
→P.846
→P.637
→P.660
> Messages regarding paper >
→P.9
→P.6
Sheet printing is selected.
13
885