Canon imagePROGRAF iPF655 User Manual page 656

Handling Paper > Handling rolls
7.
Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and the
barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.")
6
Manag-
eRemain-
Roll
Off
On
8.
Holding it at the positions indicated, close the Roll Cover.
640
Loading Rolls in the Printer
>
Important
• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the
printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the print-
ing surface.
• If the paper is wrinkled or warped, straighten it out before loading it.
• Load paper straight so it is not fed askew.
Barcodes
Printed A menu for selection of the type of paper is automatically shown on the Display Screen.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
Not prin-
ted
Printed The type and amount of paper left is automatically detected based on the barcode printed on
the roll.
There is no need to specify the type and length of the paper.
Not prin- A menu for selection of the paper type and length is automatically shown on the Display
ted Screen.
Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.
Note
• For details on types of paper to select, see the Paper Reference Guide. (See "Types of Paper.")
→P.626
Printer Operation After the Paper is Fed
→P.649
iPF655