Canon imagePROGRAF iPF655 User Manual page 796

Network Setting > NetWare Settings
5.
Select the IPv4 tab. In IP Address, enter the IP address assigned to the printer, and then enter the subnet mask in
Subnet Mask and the default gateway in Gateway Address.
10
6.
Click Set.
7.
780
Click OK after the Confirmation message is displayed.
8.
Exit imagePROGRAF Device Setup Utility.
Specifying the Printer's Frame Type
>
Important
• You must specify the IP address here to be able to configure NetWare protocol settings using Remo-
teUI.
iPF655