Canon imagePROGRAF iPF655 User Manual page 764

Control Panel > Printer Menu
Inter-
face
Setup
9
System
Setup
748
Menu Settings
>
Setting Item
TCP/I IPv6 DNS
P Set-
tings
Net- NetWare
Ware
Frame Type
Print Service
AppleTalk
Ether- Auto Detect
net
Driver
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Interface Print
Return Defaults
Sleep Timer
Buzzer
Contrast Adj.
Date & Date
Time
Time
Date Format
Language
Time Zone
Length Unit
DNS Specify whether DNS server registration is updated
State-
Dync automatically.
less
update
Addr
Pri. DNS Specify the DNS server address.
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Specify the DNS domain name.
Name
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To ap-
ply your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic configuration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported
over the LAN.
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to the
default values.
Specify the period before the printer enters sleep
mode.
Choose On for the buzzer to sound in case of errors.
Adjust the Display Screen contrast level.
Set the current date.
Set the current time. Available only if the Date setting
is specified.
Specify the date format.
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.
Choose the display unit for length. Change the unit
displayed for the remaining amount of roll paper,
Tot.Print Area, and so on.
Description, Instructions
iPF655