Control Panel
>
Printer Menu
GL2
Set-
tings
9
746
Menu Settings
>
Setting Item
Line &
Pen
Select Palette
Pen
Setup
Man-
ager
Define Palette
Reset Palette
Smoothing
ThickenFineLines
Description, Instructions
Choose Software to print according to software set-
tings. Choose Palette A or Palette B to print using the
value specified in Define Palette.
Specify the Width, Color, and Line Attributes in the
palette Pen no.. Choose Factory to confirm the values
when Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle Set-
ting as the processing for the ends and junctions of
lines.
•
If you choose No Setting
•
If you choose Circle Setting
Restore Define Palette to the default palette settings.
Choose whether to print arcs as smooth curved lines or
as multiple connected line segments.
•
If you choose Software
Operation is determined by the application. If noth-
ing is specified by the application, the result is as
shown in the figure.
Note: By default, this is a 72-sided figure
•
If you choose Smooth
Select On to print fine lines more distinctly.
iPF655