Canon imagePROGRAF iPF655 User Manual page 763

GL2 Line &
AdjustFaintLines
Set- Pen
tings Man-
ager
Proces- Warning
singOp-
tion
On-the-Fly
PageSizeProcess1
PageSizeProcess2
GL2 Set Print
Inter- EOP Timer
face
Setup
TCP/I IPv4
P
IPv6
iPF655
Setting Item
IPv4 Mode
Proto- DHCP
col
BOOTP
RARP
IPv4 IP Address
Set-
Subnet Mask
tings
Default G/W
DNS DNS Dync update
Set-
tings
Pri. DNS
SrvAddr
Sec. DNS
SrvAddr
DNS Host Name
DNS Domain
Name
IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS
Set- Dync
tings update
Description, Instructions
If fine lines are printed in colors that do not match the
colors of other shapes, selecting Off may help produce
the expected results. However, lines in some colors
may appear broken.
Select On to have any GL2-related warnings dis-
played.
Selecting On will start printing jobs sooner if you are
printing only HP RTL print jobs and printing would
not start until later. However, images may be incom-
plete in some cases, so be sure to check the printing
results.
Normally, the area available for printing excludes a
margin required by the printer, and images are posi-
tioned accordingly. Selecting On in this setting elimi-
nates any misalignment of the printing position if the
image itself includes a border.
Selecting On will determine the paper size based on
the image rendering area.
Print GL2 settings information.
Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
Choose whether the printer IP address is configured
automatically or a static IP address is entered manual-
ly.
Specify the protocol used to configure the IP address
automatically.
Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
Specify whether DNS server registration is updated
automatically.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
State- Specify whether DNS server registration is updated
full automatically.
Addr
Control Panel > Printer Menu >
Menu Settings
9
747