Printing Does Not Start; The Data Lamp On The Control Panel Does Not Light Up; The Printer Does Not Respond Even If Print Jobs Are Sent; Ink Filling.. Is Displayed - Canon imagePROGRAF iPF655 User Manual

Troubleshooting >

Printing does not start

Printing does not start

The Data lamp on the Control Panel does not light up ................................................................................... 852

The printer does not respond even if print jobs are sent ................................................................................ 852

Ink Filling.. is displayed ................................................................................................................................... 852

The display screen indicates Agitating ........................................................................................................... 853
The Data lamp on the Control Panel does not light up
The printer is not on.
The target printer was not selec-
ted when printing. (The printer is
in Sleep mode.)
The print job is paused. (The
printer is in Sleep mode.)
The printer does not respond even if print jobs are sent
12
In the Control Panel menu, Pause Print is
On.
You have selected Save in mail box in
Output Method on the printer.
Print jobs are pending.
852
Ink Filling.. is displayed
The printer was forced off during
operation.
The Data lamp on the Control Panel does not light up
>
Cause
Make sure the power cord is securely plugged in, all the way. Press the Power but-
ton to turn on the printer.
In Windows, select the printer by clicking Select Printer or Printer in the printing
dialog box and try printing again.
In Mac OS X, open the dialog box of the printer driver, select the printer from the
list of Printer, and try printing again.
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers) window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Click Print & Fax. (This is identified as Printer Setup Utility or Print Center
in other versions of Mac OS X.)
2. Select the printer, and then Resume Printer (or Start Jobs) in the Printers
menu to restart the print job.
Cause
Cause
Wait until the system has been filled with ink. This process may take about sev-
en and a half minutes.
Corrective Action
Corrective Action
Set Pause Print to Off.
(See "Pausing Printing.")
→P.19
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.")
Manage the jobs on hold and print as needed.
(See "Managing Pending Jobs (Printing or Deleting Jobs on Hold).")
→P.580
Corrective Action
→P.582
iPF655