Canon imagePROGRAF iPF655 User Manual page 250

Windows Software >
• F
Print Image with Actual Size
Prints documents at their actual size. This function is available when you have selected the size same as the width of
Roll Paper for either the length or width of the document from the
• G
Paper Size
Available when
Choose the size of the paper you will print on.
For details on available paper sizes, see " Paper Sizes
Paper sizes compatible with borderless printing are shown in the list.
• C
Enlarged/Reduced Printing
3
Choose from the following options when this setting is activated.
• Resizing Originals to Match the Paper Size
• Resizing Originals to Fit the Roll Width
• Resizing Originals by Entering a Scaling Value
D
•
Fit Paper Size
Scales the document image to match the paper size.
• E
Fit Roll Paper Width
Scales the document image to match the roll width.
• F
Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
• G
Paper Size
Choose the size of the paper you will print on.
For details on available paper sizes, see " Paper Sizes
• H
Orientation
Choose the printing orientation.
• Making the Original Orientation Match the Paper Orientation
K
•
Rotate Page 90 degrees (Conserve Paper)
Activate this setting to rotate the document image by 90 degrees before printing.
234
• Conserving Roll Paper by Rotating Originals 90 Degrees
• L
Paper Source
Choose the feed source, as desired.
Options displayed in the list vary depending on the selection in Media Type on the Main sheet.
• M
Roll Paper Width
Choose the roll width.
For details on available roll widths, see " Paper Sizes
Page Setup Sheet
Printer Driver >
D
Fit Paper Size is selected.
A
Page Size list.
"
→P.627
→P.69
→P.75
→P.81
"
→P.627
→P.194
→P.174
"
→P.627
iPF655