Table of Contents
Advertisement
TV Antenna/Cable In
The
TV A
/C
NTENNA
receiver to connect the tuner of the nearby TV to an over-the-air
antenna or cable-TV distribution system when the satellite
receiver is turned off or when using the TV/VIDEO button on
the remote control. Use a coaxial cable to make this connection
to an over-the-air (OTA) antenna or cable-TV system. The
A
/C
I
NTENNA
ABLE
N
must be connected to the
TV2 Connections
Do not use any
TV2
inactive.
Other Connections
Satellite In
The
connection(s) are used to
S
I
ATELLITE
N
receive satellite TV signals from the dish
antenna. The connection is made using
RG-6 coaxial cable(s). The
connections are color-coded blue.
: Connect a single RG-6 cable from the dish antenna to
Note
This installation does not support dual-tuner enabled features like PIP. (For
some installations with two existing RG-6 cables from the compatible LNBF or
switch, you can connect one to
Remote Antenna (for optional accessory)
The
R
A
EMOTE
NTENNA
from an optional IR/UHF Pro remote control so that it can
control menus and programming from another area. Connect this antenna here,
and place it so that it does not touch anything. If you do not connect the antenna,
you cannot use a UHF-enabled remote to control the receiver's menus and
programming. The
Telephone Jack
The
T
J
ELEPHONE
ACK
active telephone line. Use a standard RJ-11 telephone cable
assembly to make the connection. You must keep the receiver
connected to an active telephone line. Otherwise, you may not
be able to order pay-per-view programs, use all of the DISH
Interactive features, or access other DISH customer services.
Remote Controls
Remote controls give you easy access to all the features of your satellite
is used if you want the satellite
I
ABLE
N
connection is color-coded black. Your TV
output to use this feature.
C
3-4
HANNEL
connections to connect to your TV. These connections are
S
I
ATELLITE
N
S
I
ATELLITE
port receives UHF Pro signals
port is color-coded green.
R
A
EMOTE
NTENNA
is used to connect the receiver to an
TV
S
ATELLITE
and the other to
1
S
N
ATELLITE
Remote Controls
Tip: If you connect
a cable to the TV/
Antenna In port,
attach the black
cable sticker to the
cable near where it
is connected to the
receiver. The cable
stickers are all
located inside the
front cover of this
guide.
.
I
1
N
.)
I
2
N
Page 21
Hide quick links:
Advertisement
Table of Contents
