Quick Tour Of Picture-In-Picture (Pip) - Dish Network DP512 User Manual

Quick Tour of Picture-in-Picture (PIP)

If dual-tuner operation is enabled, your DISH receiver allows you to watch two
different programs at the same time using Picture-in-Picture (PIP).
1. Press the PIP button on the remote control. The PIP window
will open. The program in the small box will be whatever is
playing on the last channel you watched on that tuner.
2. Press the SWAP button. on the remote control. The channel
that was in the PIP window will now be displayed full screen.
3. Press GUIDE on the remote. Use the
that you want to watch now. Select that program.
4. This new program will be displayed full screen
5. Press the SWAP button again to return to watching your original
program full screen and put this new program in the PIP window.
6. Press the PIP button again to make the PIP window larger.
: This feature is enabled only for installations with two RG-6 ca-
* Note
bles from the compatible LNBF or switch connected to the receiver's
ports. This feature is not supported for system installations
S I
ATELLITE N
with a single RG-6 cable connected to the receiver's
Quick Tour of Picture-in-Picture (PIP)
*
to find a program
Program Guide
S I
ATELLITE N
port.
1
Page 17