Installing The Print Cartridge - Fujitsu fi-486PRFR Operator's Manual

2.1 Installing the Print Cartridge

Installation of the Print cartridge is explained in the following.
1) Press the Power button on the scanner operator panel and turn off the power.
2) Open the Hopper if it is closed (retracted).
3) Remove documents from the stacker. Pull up the lever on the right front of the
Upper transport unit and then raise it.
CAUTION
6
2.1 Installing the Print Cartridge
Make sure that the Upper transport unit is locked
before you put your hands inside of the scanner.
Hopper
Upper transport unit
Lever