Table of Contents
Advertisement
3 SETUP
Setup consists of a number of Menu's that contain software settings.
It is important that the correct software settings are made in the DOC Menu so that
everyday Customer documents are handled correctly. Document dimensions
determine the DOC Menu software settings. Therefore, when a Customer receives a
new printer, or when a new document is introduced, this Menu's settings should be
checked and modified as necessary.
The printer does not need to be connected to the Host Computer during Setup.
3.1
Introduction
A Software Setting consists of assigning a value to a parameter where:
Parameters
-
Values
-
Software Settings are held in a matrix where:
Parameters (matrix vertical plane ) are reached using a Setup Function which
advances the document under the printhead
Values (matrix horizontal plane ) are reached by using a Setup Function which
moves the Printhead along a line.
3.1.1
Setup Functions
These are:
Vertical Tab
Horizontal Tab
Setup
are shown vertically under each Menu
are shown horizontally next to the Parameter.
the document is advanced under the printhead to a new
line when the Button Bar is pressed down and released
after two seconds.
the printhead is moved a fixed horizontal distance along a
line when the Button Bar is held down for less than one
second (Hit).
3-1
Advertisement
Table of Contents
