Table of Contents
Advertisement
The Cover Offset values are:
0
= 0.1in (2.54mm) Factory Default Setting
Mechanical Top Margin = Cover Offset
1
= Up to 0.6in (13.3mm)
2
= Up to 1.1in (27.94mm)
3
= Up to 1.6in (40.64mm)
4
= Up to 2.1in (53.34mm)
This setting defines the location of the top edge of an inside sheets with respect to
the top edge of a Passbook (Psbk).
Printing is unidirectional above a Cover Offset and bi-directional below.
Measure the Cover Offset and use one of the following values:
If the Passbook Seam is horizontal and the Cover Offset is greater than 0, the
printer will smooth the document.
Setup
3-17
Advertisement
Table of Contents
