Network Settings; Basic Settings Page; System Settings Page - Canon VB101 User Manual

Detail Settings

Basic Settings Page

This page contains indispensable settings taken from the various settings pages for the VB101. If
values are specified for these settings on other pages, the most recent change is valid.
Ethernet
Specifies the same settings as the network settings page.
"Use Ethernet"
Tick this checkbox to use Ethernet.
"Address Settting Method"
If you select "Auto Setting (Bootp)", the IP address is automatically
acquired by the Bootp server after restart. If you select "Manual
Setting", enter the IP address and subnet mask also.
"IP Address"
Enter a network interface-specific IP address.
"Subnet Mask"
Enter the subnet mask specified for the network to be
connected.
"Default Gateway Address"
Specify this setting when you are connecting to a wide area
network such as the Internet.
If you selected "Auto Setting (Bootp)" as the address setting
method, check that the Bootp server has been started up.
Contact the network administrator for the IP address, subnet
mask, and default gateway address settings.
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the title page.
36
"Administration Account"
The same settings can be specified on the

System Settings page.

"Administrator ID"
Specifies the administrator ID. Up to 15
alphanumeric characters can be used
including underscores and hyphens. The
default setting is "root".
"Password"
Sets the password. Up to 15 ASCII
characters can be used (space or
printable characters).
"Password (Confirm)"
Confirms the password in the field above.
Target Application
Chooses " Webview Livescope" or "VIEW-
Windows" as the application used by the
VB101.
VIEW-Windows is an optional product
designed specifically for use within Japan.
Do not select VIEW-Windows 1.21.
WebView Livescope MV can work on
"WebView Livescope" setting.
System Settings Page
Use this page to set the administrator ID and password as well as the date and time.
Others
"Device Name"
Sets the device name (nickname). The device name is used
for log mail. If no name is specified, "VB101" is used.
c
For reasons of system security, we recommend that you change the administrator ID
and password at regular intervals. It is also a good idea to change the URL of the
Note
Settings page. However, be sure to make a note of the new settings (
that you do not forget them.
If you forget the administrator ID and password, you will have to return
the VB101 to a service center. Please contact your Canon dealer.
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the settings title page.
Detail Settings
"Administration Account"
Specifies the same setting as the basics
settings page.
"Administrator ID"
Sets the ID used by the administrator. Up
to 15 characters can be set consisting of
alphanumeric characters, underscores
and hyphens. The default setting is "root".
"Password"
Sets the password. Up to 15 ASCII
characters can be used (spaces or
printable characters).
"Password (Confirm)"
3
Confirms the password in the field above.
Settings Web Page URL
Sets the "path" component for the settings
management pages. This URL is used
subsequently when you access the settings
management pages after restarting the
system. Up to 31 ASCII characters can be
used (Up to 31 characters can be set
consisting of alphanumeric characters,
underscores and hyphens.).
Date and Time
You can only change the time on the VB101
when the "Set the clock to the following
time" option is ticked. Because this setting is
returned to the VB101 when the "Send
Config. and Reboot VB101" button is
clicked, the values for the settings from year
to second must be matched to the time
when the button is clicked.
P.110) so
37