Access Control Settings Page - Canon VB101 User Manual

Detail Settings
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the settings title page.
48
Picture Recording and Output: by
Schedule
Use this setting to operate the picture
recording function based on a schedule set
beforehand. For a detailed example of actual
operation, see Chapter 5, "Using the Picture
Recording Function". ( P.79)
"Schedule 1 to 4"
"Record pictures"
When this option is ticked, picture
recording is performed based on the
settings below.
"Camera Position"
Selects the camera angle used for picture
recording. Select "Not Specified", "Home
1" to "Home 4" or "Preset 1" to "Preset 8".
"Camera Stabilization Time (sec.)"
When the camera moves to a new
photography position, this setting specifies
the delay time for the camera to stabilize
before still video is captured.
"Output to External Device 1/2"
Tick this option to output ON to external
device 1 or 2 in accordance with the Start
Time, Repetition interval (min.) and No. of
repetitions settings specified below.
"Output Time (sec.)"
Sets the duration for which output is ON at
the specified time. If zero is specified,
output is only ON momentarily.
"Start Time"
Sets the start time for picture recording
and output to an external device triggered
by the schedule.
"Repetition interval (min.)/
No. of repetitions"
Sets the execution interval and the
number of times for repeated picture
recording and output to an external device
following the start time.

Access Control Settings Page

From this page, you can restrict access to the VB101 to specific authorized users only, and you
can control who may and may not access from a specific host. In either case, access by restricted
clients is prohibited.
Authorized/Limited Host Specification
"Authorized/Limited Host List"
In this list, you can describe the details of how access to the
hosts is permitted or denied.
See the next page for the description format.
"Apply this list to WebView Livescope"
If you tick this option, the listed hosts are used as the hosts that
can access the WebView Livescope server.
"Apply this list to HTTP server"
If you tick this option, the listed hosts are used as the hosts that
can access the HTTP server.
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the settings title page.
Detail Settings
Authorized user account
"Authorized user list"
Only accounts registered in this list are
permitted to connect to the VB101. Up to
10 users can be registered.
"Delete"
Select a user account and click the
delete button to remove the user from
the list.
"Add"
You can add authorized users to the list
by entering their account name and
password.
3
"Authorize access to HTTP Server by
listed users only"
When this option is ticked, only users
registered in the list are permitted to
connect to the VB101.
Access using the WebView Livescope
Helper Viewer and WebView Livescope
MV is prohibited.
49