Package Contents; Precautions For Use; Precautions For Switching The Vb101 On And Off - Canon VB101 User Manual

Package Contents

The VB101 package contains the following items. If any of these items is missing, contact the
retailer from which you purchased the product.
1. VB101 main unit
3. AC cable (1 meter )
3 ft. 3 / in.
32
* The cable length may differ depending on the
country in which the product was purchased.
5. RS-232C cable
(miniDIN-Dsub9pin Female sub)
For setup, 3 m (9 ft. 10 3 / in.)
32
7. Users Manual (This document)
8. Warranty Card
22
2. AC Adapter PA-V16
4. RS-232C cable (miniDIN-miniDIN)
For camera control, 3 m (9 ft. 10 3 / in.)
32
6. CD-ROM
CD-ROM contents
ReadMe
VB101 Initial Setup Tools
Factory Default Setup Tools
Administrator Viewer
Remote Firmware Upgrade Utility
Internal File System
Webview Livescope Helper Viewer version 3.1
Webview Livescope Viewer User's Manual (PDF file)

Precautions for use

Precautions for Switching the VB101 On and Off

The VB101 has no power switch. To switch the VB101 off and on, unplug the AC adapter. When
you unplug the AC adapter from the VB101, wait at least 5 seconds and then plug the AC adapter
to the VB101. Be sure to observe the precautions given in "aImportant Safety Instructions".
VB101
c
Refer also to the enclosed ReadMe file. The ReadMe file may contain
important information not included in this manual. Be sure to read this file.
Note
If the VB101 will not be used for some time, unplug the AC adapter from
the power supply.
AC Outlet
AC adapter AC cable
2
23