Part 2 User's Reference; Cutting Area - Roland EGX-300 User Manual

Part 2 User's Reference

2-1 Cutting Area

The maximum cutting area of the EGX-300 is 305 mm (X) x 230 mm (Y) x 30 mm (Z) (12 in. (X) x 9 in. (Y) x 1-1/8 in. (Z) ). When
converted to coordinate values, this corresponds to (x, y, z) = (30500, 23000, 3000) when the coordinate unit is 0.01 mm, or (x, y, z) =
(12200, 9200, 3000) when the coordinate unit is 0.025 mm. Changing the coordinate unit causes only the coordinate units for the X and
Y axes to change. The coordinate unit along the Z axis is always 0.01 mm/step.
The actual available cutting area is subject to restrictions according to the length of the attached cutter and the workpiece height; and in
some cases it may be larger than the maximum operating area.
30 mm
(1-1/8 in.)
+Z
+Y
+X
305 mm
(12 in.)
230 mm (9 in.)
Part 2
35