Roland EGX-300 User Manual page 6

Before attempting to replace the
motor brushes or the spindle motor,
stop cutting operations on the EGX-
300 and allow to stand for an hour or
so.
Failure to do so may result in burns from the
hot motor.
Do not operate if a transparent cover
is cracked or broken.
If the transparent cover at the front or the
side of the unit is cracked, contact a service
agent immediately for repairs.
4
Please use a vacuum cleaner to
remove cutting dust.
Do not use any blower like airbrush.
Otherwise, dust spread in the air may harm
your health.
Do not attempt to unplug the power
cord with wet hands.
Doing so may
result in electrical
shock.
Use a commercially available brush
to remove metal cuttings.
Attempting to use a
vacuum cleaner to
take up metal
cuttings may cause
fire in the vacuum
cleaner.