Table of Contents
Advertisement
Making Settings with the Liquid-crystal Display
When coordinate values are displayed:
Use the
Use the
Use the
Press the
and
keys to move the blinking
cursor (" ") and select the
setting item.
Press the
and
keys to change the value (or
selection choice), and then
press the
key to confirm.
EMERGENCY STOP switch
This switch cuts the power supply and forces the
machine to stop, regardless of whether operation is
in progress. Press the EMERGENCY STOP
switch immediately if dangerous or abnormal
operation occurs.
Spindle control
This is used to set the speed of the spindle motor.
Liquid-crystal display
The settings and selection choices (or values) for the EGX-300 are shown on this display.
Error messages also appear here in the event of a problem.
MENU key
This key scrolls through the menu on the liquid-crystal display (i.e., it changes the panel
display).
ENTER/PAUSE key
This key is used to confirm settings, values, and selections made with the liquid-crystal
display.
When pressed during cutting, operation is paused.
SPINDLE TEST ON/OFF key
This key is used to start and stop the spindle motor. The spindle will not rotate while the
cover is open.
+Z (CUTTER UP) key
This key makes the cutter move in a positive direction on the Z axis (i.e., upward).
Movement is always at a constant speed.
-Z (CUTTER DOWN) key
This key makes the cutter move in a negative direction on the Z axis (i.e., downward).
Movement is always at a constant speed.
Arrow keys
Pressing an arrow key causes the XY table to move in the corresponding direction.
Holding down the key makes the XY table move faster (except during spindle rotation,
when the speed of movement does not change).
The arrow keys are also used together with the liquid-crystal display to manipulate
settings, select items, display other choices, and change values.
and
keys to move along the X axis.
and
keys to move along the Y axis.
and
keys to move along the Z axis.
Press the
display the next menu.
The value (or selection
choice) enclosed in angled
brackets ("< >") indicates
the current setting.
Use the
and
cursor (" ") and select the execution item.
Press the
key to execute.
key to
Canceling an emergency stop
Rotate the red
portion of the
switch clockwise.
keys to move the blinking
Press the
and
keys
to move the blinking cursor (" ")
and select the setting item.
Press the
key to confirm.
Press the
and
keys
to move the blinking cursor (" ")
and select the setting item.
Press the
key to confirm.
Part 1
13
Hide quick links:
Advertisement
Table of Contents
