Setup Menu - InFocus IN5132 User Manual

SETUP menu

SETUP menu
From the SETUP menu, you can perform the items
shown in the table below.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or the ENTER button to
perform this item. Then follow the instructions below.
Item
AUTO KEYSTONE
KEYSTONE
(continued on next page)
54
Selecting this item performs the Automatic Keystone distortion
correction. The projector automatically corrects vertical keystone
distortion due to the (forward/backward) setup angle.
When this function is selected, it will only be performed once. When
the projector slant changes, perform this function again.
• The adjustable range of this function will vary among inputs. For
some inputs, this function may not work well.
• When the projector is in one of the following modes, the automatic
vertical keystone correction feature may not work correctly or at all:
- REAR / CEILING or FRONT / CEILING is selected for the
INSTALLATION item in the SETUP menu, and the projector screen
is slanted or tilted downwards.
- The ZOOM adjustment is not set to the full WIDE (wide-angle
focus).
- The projector is nearly horizontal (±4°).
- The projector is inclined more than 35 degrees.
• This function is unavailable when the TRANSITION DETECTOR
(90) is ON or the screen is adjusted by PERFECT FIT (33,
34).
Using the ◄/► buttons corrects the vertical keystone distortion.
Shrink the bottom of the image ó Shrink the top of the image
• The adjustable range of this function will vary among inputs. For
some inputs, this function may not work well.
• When the zoom adjustment is set to TELE (telephoto focus), this
function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus)
whenever possible.
• This function is unavailable when the TRANSITION DETECTOR
(90) is ON or the screen is adjusted by PERFECT FIT (33,
34).
Description