Selecting an aspect ratio
Press the ASPECT button on the remote control.
1.
Each time you press the button, the projector switches
the aspect ratio as follows.
For a computer signal
IN5132, IN5142:
NORMAL 4:3 16:9 16:10
IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145:
NORMAL 4:3 16:9 16:10 NATIVE
For an HDMI
IN5132, IN5142:
NORMAL 4:3 16:9 16:10 14:9
IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145:
NORMAL 4:3 16:9 16:10 14:9 NATIVE
For a video signal, s-video signal or component video signal
IN5132, IN5142:
4:3 16:9 14:9
IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145:
4:3 16:9 16:10 14:9 NATIVE
When there is no signal or an input signal from the LAN, USB TYPE A
or USB TYPE B ports is being used:
IN5132, IN5142: 4:3 (fixed)
IN5134, IN5134a, IN5144, IN5144a, IN5135, IN5145: 16:10 (fixed)
NOTE
• The ASPECT button does not work when no compatible signal is
inputted.
• The NORMAL mode keeps the source's original aspect ratio setting.
signal
TM
Operating
ASPECT
button
27