Safety Information; Symbols And Headings Explanation; Important Safety Instruction - InFocus IN5132 User Manual

Safety Information

Symbol and headings explanation
The following symbols and headings are used for the manuals and the product as fol-
lows, for safety purposes. Please review and head this important information.
WARNING This warns of a serious risk of personal injury or even death.
CAUTION This warns of a risk of personal injury or physical damage.
NOTICE This warns of a potential for causing problems.
Important safety instructions
The following instructions are designed to ensure the safe use of this product.
Always follow these instructions when handling the product. The manufacturer
assumes no responsibility for any damage caused by mishandling that is beyond
WARNING
example, when the projector is smoking, smells strange, had a liquid spilled on it,
had an object put inside it, is broken, etc.). If an abnormality should occur, unplug
the projector immediately.
Keep the product away from children and pets.
physician immediately for emergency treatment.
Do not use the product when there is a threat of thunder and lightening.
Unplug the projector from the power outlet when it is not in use.
Do not connect the projector to a power supply when a lens unit is not attached to it.
Do not open or remove any portion of the product, unless the manuals direct
you so. Internal maintenance should only be accomplished by your dealer or their
service personnel.
Do not modify the projector or accessories.
Do not let any liquid or objects get inside of the product.
Do not get the product wet.
Do not place the projector where any oils, such as cooking or machine oil, are used. Oil
may harm the product, resulting in a malfunction, or falling from mounted position.
Do not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as an uneven surface or a
leaning table.
- Do not place the product in an unstable position. Place the projector so that it
does not protrude from the surface which it is placed on.
- Hold the projector using the grips on the bottom of the projector when moving it.
- Remove all the attachments including the power cord and cables from the
projector before carrying the projector.
Do not look into the lens or openings of the projector, while the lamp is on.
Stay away from the lamp cover and exhaust vents when the projection lamp is on and
when the lamp has just gone out since they will be very hot.
2
Never use the product during or after an abnormal situation (for