Displaying The Picture - InFocus IN5132 User Manual

Displaying the picture

1. Activate your signal source. Turn the signal
source on, and send the signal to the projector.
2. Press the INPUT button on the projector.
Each time you press the button, the projector
switches its input port in turn.
You can also use the remote control to select
an input signal. Press any of the buttons from
COMPUTER 1 / 2, LAN, USB TYPE A / B,
HDMI 1 / 2, COMPONENT, S-VIDEO or
VIDEO to select the input signal from each
port.
3. Use the VOL + / - buttons to adjust the volume.
4. Press the ASPECT button on the remote control.
Each time you press the button, the projector
switches the mode for aspect ratio in turn.
5. Use the ZOOM + / - buttons on the remote
control or ZOOM
on the projector to adjust the screen size.
6. Use the FOCUS + / - buttons on the projector or
the remote control to focus the picture.
ZOOM button
FOCUS - / + buttons
CAUTION
on, use the lens shutter or AV MUTE function (see User's Manual - Operating
Guide). Taking any other action may cause the damage on the projector.
NOTE
The ASPECT button does not work when no proper signal is inputted.
Operating Guide.
INPUT button
Buttons for input ports
VOL + / -
buttons
ASPECT
button
ZOOM + / -
buttons
FOCUS + / -
buttons
User's Manual -
11