Troubleshooting; Warnings Displayed On The Status Monitor; Only For In5142, In5144, In5144A And; Related Messages - InFocus IN5132 User Manual

Troubleshooting

Troubleshooting
If something unusual happens, stop using the projector immediately.
WARNING
such as smoke, a strange odor, excessive sound, damage to the projector or
its accessories, liquids or foreign matter have gotten into the projector, etc. In
such cases, immediately disconnect the power plug from the power outlet. After
verifying that the smoke or odor has stopped, contact to your dealer or service
company.
If a problem occurs with the projector, review the following troubleshooting tips
before requesting repair.
If the problem remains unresolved, contact your dealer or service company. They
can tell you what your warranty status is.

Warnings displayed on the Status Monitor

<Only for IN5142, IN5144, IN5144a and IN5145>
If an error occurs, a warning will be displayed on the Status Monitor (21). Refer
to the tables in the sections "Related messages" and "Regarding the indicator
lamps".

Related messages

When a message appears, review the following troubleshooting tips in the table
below. Although these messages will automatically disappear after several
minutes, they will be reappear every time the power is turned on.
Message
(continued on next page)
►Never use the projector if something unusual is observed
Troubleshooting
There is no input signal.
Confirm the signal input connection, and the status of
the signal source.
The USB TYPE B port is the selected picture input
source even if MOUSE is selected for USB TYPE B
(67).
Set USB TYPE B to USB DISPLAY in the OPTION
menu. In this case, you will not be able to use the simple
mouse and keyboard function. Otherwise select a
different port for picture input.
Projector is waiting for an image file.
Check the hardware connections, projector settings and
network-related settings.
The network connection between the projector and
computer may be disconnected. Re-connect them.
Description
113