Brother FAX-2840 Basic User's Manual page 74

Error Message
Scan Unable XX
Size mismatch
Toner Ended
Toner Low
66
Cause
The machine has a mechanical
problem.
The paper in the tray is not a
correct size.
It is time to replace the toner
cartridge.
While memory is available, faxes
will be stored in the memory.
If the LCD shows Toner Low you
can still print; however, the
machine is telling you that the
toner cartridge is near the end of
its life.
Action
 (For FAX-2840 and FAX-2845)
See Transferring your faxes or Fax
Journal report uu page 67 before
disconnecting the machine so you will
not lose any important messages. Then,
turn the power switch off, wait a few
seconds, and then turn it on again.
Leave the machine for 15 minutes with
the power on.
(For FAX-2940)
Turn the power switch off, wait a few
seconds, and then turn it on again.
Leave the machine for 15 minutes with
the power on.
 If the problem continues, call Brother
Customer Service or your local Brother
dealer.
Load an appropriate size of paper in the
tray, and re-set the "Paper Size" (Menu, 1,
2, 2). (See Paper Size uu page 15.)
Replace the toner cartridge with a new one.
(See Replacing the toner cartridge
uu page 40.)
Order a new toner cartridge now so a
replacement toner cartridge will be available
when the LCD shows Replace Toner or
Toner Ended.
