Deleting One Touch And Speed Dial Numbers; (For Fax-2845) Tone Or Pulse - Brother FAX-2840 Basic User's Manual

Deleting One Touch and
Speed Dial numbers
If you try to delete a One Touch or Speed Dial
number, the LCD will show the name or
number already stored there. If the One
Touch or Speed Dial number you are trying to
delete has a scheduled job or has been set to
a fax forwarding number, the LCD will ask you
if you want to change the name or number.
a
Do one of the following:
To delete a stored One Touch

number, press Menu, 2, 3, 1.
Address Book
1.One Touch Dial
Press the One Touch key you want
to delete.
 To delete a stored Speed Dial
number, press Menu, 2, 3, 2.
Address Book
2.Speed Dial
Enter the Speed Dial number you
want to delete then press OK.
b
To delete the stored data, press 2.
#005:MIKE
1.Change 2.Clear
c
Do one of the following:
 To confirm the stored data will be
deleted, press 1.
 To exit without deleting the stored
data, press 2.
Erase This Data?
1.Yes 2.No
d
Press Stop/Exit.
Dialling and storing numbers

(For FAX-2845) Tone or Pulse

7
If you have a Pulse dialling service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have a Touch Tone service, you
will not need this feature to send tone signals.
a
Lift the handset of the machine.
b
Press # on the machine's control panel.
Any digits dialled after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialling service.
7
7
37