Brother FAX-2840 Basic User's Manual page 63

• If the paper in the manual feed slot is not
A4 or Letter size, the machine will stop the
Drum Cleaning process and eject the
paper.
• Make sure that the paper is straight and in
the correct position in the manual feed
slot. If it is not, it may not be fed correctly,
resulting in a paper jam.
• DO NOT close the back cover (face-up
output tray) during the Drum Cleaning
process. The machine will stop the Drum
Cleaning process and it may cause a
paper jam.
h
When the machine has finished
cleaning, the machine returns to Ready
mode.
i
Repeat steps e to h two more times
using a new blank sheet of paper each
time. Upon completion please discard
the used paper.
j
Close the back cover (face-up output
tray) and the manual feed slot cover.
If the problem has not been solved, follow the
steps below:
a
Open the front cover, and then leave the
machine turned on for 10 minutes for the
internal fan to cool the internal parts of
the machine that are extremely hot.
Routine maintenance
b
After the machine has cooled down, turn
off the machine's power switch.
Note
(For FAX-2840 and FAX-2845)
To prevent you from losing any important
messages, see Transferring your faxes or
Fax Journal report uu page 67.
WARNING
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. Wait for the machine to cool
down before you touch the internal parts of
the machine.
A
55