Rocktron VooDu Valve Online User Manual page 93

To reload user data from a sequencer:
Connect a standard MIDI cable from the MIDI OUT of the transmitting sequencer to the
Step 1
MIDI IN on the receiving Voodu Valve.
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving Voodu Valve
back to the MIDI IN of the transmitting sequencer.
Turn the FUNCTION SELECT controls on both the receiving Voodu Valve until "MIDI
Step 2
DUMP/LOAD" is displayed.
Turn the PARAMETER SELECT controls on the receiving Voodu Valve until "BULK
Step 3
DUMP/LOAD" is displayed.
Play back the data stored on the sequencer. The Voodu Valve will display the data strings as it
Step 4
is storing them. Each data string will appear with the word "LOADED". After all the user
data has been loaded, the Voodu Valve will display "LOAD COMPLETE". Do not play back
the data from the sequencer faster than it was loaded, as errors may occur (errors may also
occur if any knob is turned or any button is pressed before the message "LOAD COM-
PLETE" appears).
RECEIVING VOODU VALVE
RECEIVING VOODU VALVE
RECEIVING VOODU VALVE