Rocktron VooDu Valve Online User Manual page 90

Step 4
Turn the PRESET control on the transmitting Voodu Valve to the preset that is to be dumped
into the receiving Voodu Valve. As the PRESET control is turned, the preset number will be
displayed in the first three characters of the display.
Step 5
Use the PRESET control on the receiving Voodu Valve to select the preset location to store
the received preset. The preset currently stored at the selected location will be lost when the
new preset is received, therefore caution should be used when selecting a preset location.
Step 6
To initiate the dump, press the STORE button on the transmitting Voodu Valve. The transmit-
ting Voodu Valve will display the preset number being dumped and "DUMPED". The receiv-
ing Voodu Valve will display the preset location being stored to and "RECEIVING..." while it
receives and stores the preset parameters and title.
TRANSMITTING VOODU VALVE
After all the information for the dumped preset is stored, the receiving Voodu Valve will
display "LOADED". The receiving Voodu Valve also recalls the loaded preset at this time so
that it may be verified.
Note: If there is an error in transmission, the unit will display "RECEIVE ERROR". Should
this occur, check connections and try again. If other errors occur, check the Error
Messages chart in the Appendix.
TRANSMITTING VOODU VALVE
RECEIVING VOODU VALVE
RECEIVING VOODU VALVE
RECEIVING VOODU VALVE