Rocktron VooDu Valve Online User Manual page 9

1 BALANCED OUTPUT LEVEL control
This control determines the output level at the XLR BALANCED OUTPUTS.
Note that the balanced outputs pass the same signals as the unbalanced
outputs, except that the levels are independently adjustable.
2 (L) BALANCED OUTPUT connector
This balanced XLR connector provides the left balanced output of the Voodu
Valve for direct use into a mixing console.
3 (R) BALANCED OUTPUT connector
This balanced XLR connector provides the right balanced output of the Voodu
Valve for direct use into a mixing console.
4 (L) UNBALANCED OUTPUT jack
This 1/4" unbalanced RTS jack provides the left unbalanced output of the Voodu
Valve for use with a guitar amplifier or rack system setup.
In addition, this jack also allows for the connection of stereo headphones (600
impedance or greater).
5 (R) UNBALANCED OUTPUT jack
This 1/4" unbalanced RTS jack provides the right unbalanced output of the
Voodu Valve for use with a guitar amplifier or rack system setup.
6 FOOTSWITCH jack
This 1/4" mono jack allows for the connection of a momentary footswitch to
control the Tapped Delay feature of the Voodu Valve. The Tapped Delay feature
allows the player to set (or reset) the current delay time by tapping the
footswitch. The new delay time will be based on the length of time between two
taps. For more information on this feature, refer to the "Tap Delay" section in
Chapter 8.
7 REMOTE jack
This 7-pin DIN connector is provided for the connection of a Rocktron All
™
Access
footswitch for the Voodu Valve. This feature allows the user to access Voodu
Valve functions and parameters via the remote footswitch.
MIDI footswitch, which can be configured to act as a dedicated remote