Rocktron VooDu Valve Online User Manual page 80

Step 3
Use the PARAMETER ADJUST control to select the controller number to be assigned to the
PARA 1 parameter. Any number from 0 to 120 may be selected, as well as OFF (will not
respond to MIDI control changes). Match the number selected for this parameter with the
controller number on the MIDI transmitter.
Step 4
After selecting the desired controller number, press the STORE button to save the number for
the NUMB 1 parameter. "STORED" will flash briefly on the display.
Step 5
Turn the PARAMETER SELECT control one step clockwise to display the parameter that is
currently mapped to the NUMB 1 control number.
Turn the PARAMETER ADJUST control to scroll through the available parameters for the
Step 6
current configuration.
Step 7 After selecting the parameter that you which to assign to a controller, press the STORE
button to save it. The Voodu Valve will flash "STORED" briefly.
The Voodu Valve allows you to select an upper and lower value limit
NOTE:
which the parameter cannot exceed. For example, if a parameter has a
value range from -
eter to vary from only -12dB to -2dB, you may set a lower limit of -12
and an upper limit of -2 via the Upper and Lower Limit parameters.
When a parameter is stored in the Controller Assign function (Step 7),
the maximum parameter value is automatically stored as the upper limit,
while the minimum value is stored as the lower limit.
to 0dB, yet you would like the range of the param-