Intermec EasyCoder F2 Installation & Operation Manual page 28

Bar code label printer ipl version

Hide thumbs Also See for EasyCoder F2:

Table of Contents

Peel-Off, cont.

Route the liner around the tear bar and the

liner drive roller and back under the print

mechanism and guide shaft.

Press the handle to expand the takeup hub and

secure the liner. Then rotate the hub counter-

clockwise until the liner becomes tight.

Intermec EasyCoder F2 – Installation & Operation IPL Version, Ed. 1

Insert the start of the liner under the lip of the

takeup hub, then rotate the hub counterclock-

wise a few turns to wind up some of the liner.

This diagram shows the media and liner paths.

Chapter 5 Ribbon Load

Table of Contents