18
Care and cleaning
7.
To do this, grip the top of the large mesh
filter and pull it forwards until it comes
loose from the two brackets.
8.
Remove fluff from the entire filter area.
It is best to use a vacuum cleaner for this
purpose.
9.
Press both journals of the large mesh
filter into the brackets on the loading
door until they snap into place.
10. Re-insert fine strainer.
11. Press against the large mesh filter until
it locks into the interlock.
If the fine strainer is not fitted, the large
mesh filter will not snap into place and the
loading door cannot be closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cycle has finished.
Emptying the water reservoir
Empty the water reservoir after every drying cycle.
If the water reservoir is full, an active programme will break off automatically and the
empty container
the water reservoir must first be emptied.
WARNING!
The condensed water is not suitable for drinking or for preparing foodstuffs.
1. Take out water reservoir completely.
icon on the display will light up. In order to continue the programme,