Cleaning The Door Seal - Electrolux EDC 5372 User Information

4. Take out fine strainer.
5. Remove fluff from fine strainer. It is
best to use a damp hand for this pur-
pose.
Clean the entire filter area
3
The strainer area does not have to be cleaned after every drying cycle, but
should be checked regularly and cleaned of fluff if necessary.
6. To do this, grip the top of the large
mesh filter and pull it forwards until it
comes loose from the two brackets.
7. Remove fluff from the entire filter area.
It is best to use a vacuum cleaner for
this purpose.
8. Press both journals of the large mesh
filter into the brackets on the loading
door until they snap into place.
9. Re-insert fine strainer.
10.Press against the large mesh filter un-
til it locks into the interlock.
3
If the fine strainer is not fitted, the large
mesh filter will not snap into place and
the loading door cannot be closed.

Cleaning the door seal

Wipe the door seal with a damp cloth immediately after the drying cycle has
finished.
16