Table of Contents
Advertisement
1.
Open loading door
2.
Use a damp hand to clean the micro-
fine filter, which is built into the lower
part of the loading aperture.
3.
After a period of time, a patina due to
detergent residue on laundry forms on
the filters. When this occurs, clean the
filters with warm water using a brush.
Remove the filter from the door pulling
it out. It can be positioned with the tooth
facing to the left or to the right).
After cleaning do not forget to put it
back.
4.
Push down unlock button on large mesh
filter.
Large mesh filter jumps up.
5.
Take out fine strainer.
6.
Remove fluff from fine strainer. It is best
to use a damp hand for this purpose.
Clean the entire filter area
The strainer area does not have to be
cleaned after every drying cycle, but
should be checked regularly and cleaned
of fluff if necessary.
Care and cleaning
17
Advertisement
Table of Contents
