Time - Electrolux LAVATHERM 58860 User Manual

14
Daily use
delicate
delicate icon flashes. Flashing icon means: selected but not active. To activate se-
lected option press OK button (4). Activated option is visible as flashing icon with dash
beneath.
3. Press alternately OPTION button (3) to select appropriate options and OK button (4) to
activate it. Active options are always on as icons with dash beneath.
4. Option selection mode is finished when you go through all of them or you stop selecting.
Only activated option icons are on.
Some options cannot be selected together as delicate and sensitive . Some of them are not
selectable with certain programmes
To deselect an option follow the same steps. Option icon should disappear.
delicate
For especially gentle drying of sensitive fabrics with the
sensitive textiles (e.g. acrylic, viscose). Programme is executed with reduced heat.
delicate is only suitable for use with loads of up to 3kg.
When the option is active, the delicate
long anti-crease
A long anti-crease phase lengthens the anti-crease phase (30 min.) at the end of the drying
additionally by 60 minutes. The drum rotates at intervals during this phase. This keeps the
laundry loose and free of creases. Phase lasts in total 90 minutes. The laundry can be
removed at any time during the anti-crease phase.
When the option is active, the long anti-crease
sensitive
For gentle drying of fabrics that are frequently worn. Programme starts on full heat setting,
which is then reduced as the programme progresses to be kind to the washing.
When the option is active, the sensitive
buzzer
The appliance is supplied with the buzzer function deactivated.
To activate buzzer choose buzzer option.
When the option is active, the buzzer
The buzzer sounds or plays a tune during:
– cycle end
– anti-crease phase and when phase starts or ends
– cycle interruption by a warning
– alarm

TIME

To select the programme duration after setting the TIME PROGRAMME. You can select a
programme duration from 10 min. to 3 hours in 10 - minute steps.
1.
Turn the programme knob to the TIME PROGRAMME. The blinking
button is on. (corresponding to the cooling phase).
long anti-crease
icon is on.
icon is on.
icon is on.
sensitive
care label and for temperature-
icon is on.
buzzer
above TIME