Installing A System Board - HP ProLiant DL145 Maintenance And Service Manual
Generation 3 server
Hide thumbs
Also See for ProLiant DL145:
- Maintenance and service manual (109 pages) ,
- User manual (105 pages) ,
- Deployment manual (54 pages)
Table of Contents
Advertisement
Figure 28 Removing the mounting screws from the system board
8.
Remove the system board by lifting the end closest to the fans enough to clear the fan bracket and gently
sliding the system board toward the front of the chassis.
Figure 29 Removing the system board from the chassis
Installing a system board
This section assumes that the components or cables that would prevent a system board installation are removed
or disconnected.
1.
Install the system board.
a. Lay the back end on the floor of the chassis, holding the front end up enough to clear the
fan bracket.
Removal and replacement procedures 30
Advertisement
Table of Contents
