Power Supply Unit (Psu) - HP ProLiant DL145 Maintenance And Service Manual
Generation 3 server
Hide thumbs
Also See for ProLiant DL145:
- Maintenance and service manual (109 pages) ,
- User manual (105 pages) ,
- Deployment manual (54 pages)
Table of Contents
Advertisement
Figure 65 Installing the power cable guide
3.
Connect the 14-pin power cable to the connector on the system board (P22).
4.
Perform the post-installation procedures described on page 12.
Power supply unit (PSU)
Located on the rear panel of the server is a single standard autoranging 650-watt PSU. Figure 66 shows the
location of the PSU.
Removal and replacement procedures 54
Advertisement
Table of Contents
