HP ProLiant DL145 Maintenance And Service Manual page 71

Table 8 Hardware specifications
Item
Power supply unit (PSU)
System management function
Thermal solution
Table 9 Physical dimensions
Item
System board dimensions
Length
Width
Server dimensions
Height
Width
Depth
Server weight (maximum configuration)
Table 10 Environmental specifications
Item
System inlet temperature
Operating
Non-operating (unpacked)
Storage (unpacked)
Shipping (packed)
NOTE: System performance may be reduced if operating above 30° C (86° F).
NOTE: Operating temperature has an altitude derating of 1° C per 300 m to 3000 m.
Relative humidity (non-condensing)
Operating
Non-operating
Altitude
Operating
Non-operating
NOTE: The maximum allowable altitude change rate is 457 m/min (1500 ft/min)
Acoustic noise
Operating minimum (random seeks to
fixed disks)
To review typical system power ratings, use the Active Answers Power Calculator, which is available online at
http://h30099.www3.hp.com/configurator/powercalcs.asp.
Table 11 Power supply requirements
Item
Model
PSU type
Input type
Description
1U 650-watt PSU
IPMI 2.0-compliant with dedicated 10/100 Mbps LAN port for online system
health monitoring
Three system fans for the memory modules, processors, system chipsets, and
expansion slots
Two PSU fans
Description
381 mm (15 in)
325 mm (12.8 in)
43.2 mm (1.7 in)
426.7 mm (16.786 in)
675.6 mm (26.6 in)
15.87 kg (35 lb)
Description
10° to 35° C (50° to 95° F)
0° to 50° C (32° to 122° F)
5° to 40° C (41° to 104° F)
-40° to 70° C (-40° to 158° F)
10% to 90%, 28° C (82.4° F) maximum wet-bulb temperature
5% to 95%, 38.7° C (101.7° F) maximum wet-bulb temperature
3050 m (10,000 ft). This value may be limited by the type and number of
options installed.
9144 m (30,000 ft)
<6.4 Bels @ <25° C (77° F)
Description
API4FS18+490
1U 650 W
AC
Physical and operating specifications 71