Figure 56 Installing a full-sized HTX or PCI Express x16 expansion board
Figure 57 Installing a low-profile PCI-X or PCI Express x4 expansion board
7.
Connect any necessary cables to the expansion board.
Refer to the documentation that came with the board.
8.
Continue with the procedure in the "Installing a riser board assembly" section on page 43.
System battery
The HP ProLiant server uses nonvolatile memory that requires a battery to retain system information when power
is removed. The battery, a 3 V 200-mAh internal lithium battery, is located on the system board (XBAT1).
Removal and replacement procedures 48