How To View The Event Log - Honeywell Accenta User Manual

Accenta/Optima User Guide

How to View the Event Log

1 = LCD Keypad:
The event log gives a display of all the events that have taken place. The events are arranged by date and time.
Up to 250 events can be stored in the memory. When the log reaches 250 events and another event takes
place, the oldest event drops out.
To view the event log:
• Press and then enter your code [0][1][2][3]. The LED
goes off to indicate that you are in Programming mode.
The first menu Walk Test appears on the screen.
• Press .
• Choose [1] for Event Log in LCD screen.
• The last event (250) appears on LCD screen.
To go forward through the event log in sequence, press
To go back through the event log in sequence, press
• Press twice to leave the menu.
To go to a specific event:
• Press .
• Key in the Event Number you want to see (eg 150).
• Press . The event appears on the LCD screen.
• Press again to see further details of the event.
• Press twice to leave the menu option.
How to View Event Log
0>Walk Test
Event Log
1 LCD, 2 LED?
.
.
250>ENG ACCESS
08:44:03 17-May
Event Number?
# # #
Event Number?
1 5 0
150>Code entry
09:23:12 04-Jan
User 4
C>View
15
then [0][1][2][3]
[1]
[150]
Event Log