Turning On Part Of The System (Part On) - Bosch D220 User Manual

Turning On Part of the System (Part On)

I have this feature.
I do not have this feature.
Part On turns on only a part of your system, leaving the rest of the
system turned off. Refer to the Point Identification section of your
keypad's reference card to identify Part points. Once you press the [0]
key, exit delay time starts to count down. You should leave before exit
delay time expires. Leaving after exit delay expires causes an alarm event.
Use Part On when you want part of your system turned on.
1. Make sure Part points are normal. In this example, points 5, 6, 7,
and 8 are Part points. Press the [0] key. The display shows:
2. If all Part points are normal, exit delay time begins. If your
system has faulted points, you should return them to normal, or
refer to Bypassing Points (on page 16).
3. During exit delay, you may stop the system from turning on by
pressing [CLEAR].
4. When exit delay time expires, the keypad beeps three times and
then the system turns on.
5. To turn the system off, enter your personal passcode.
14